The Bachelor of Fine Arts in Art

Prerequisites for Admission to the BFA Programs

1. Before you apply, all Program Admission Prerequisites must be satisfied.

2. A grade point average of at least 3.0 in all art course work is required.

Note: While not a prerequisite, transfer students are advised to complete 9 units in the Department of Art and Art History prior to applying for admission to the Bachelor of Fine Arts Program.

Program Admission Prerequisites: 15 units

Art History Core: 6 units

1 course required:

1 course selected from:

Lower-Division Foundation Studio: 9 units

3 courses required:

Application Time Line for BFA Degree Program

1. If eligible, you should apply for admission to the Bachelor of Fine Arts degree program not earlier than the second semester of your sophomore year. Admission into the program will begin the semester following acceptance.

2. The portfolio review takes place in the last half of the fall and spring semesters. Information on required application materials and specific deadlines are discussed at the BFA Information Meeting in the beginning of each semester. For further information, contact the BFA Program Coordinator.

Total Course Requirements for the Bachelor's Degree: 132 units

See Bachelor's Degree Requirements in the University Catalog for complete details on general degree requirements. A minimum of 40 units, including those required for the major, must be upper division.

A suggested Major Academic Plan (MAP) has been prepared to help students meet all graduation requirements within four years. You can view MAPs on the Degree MAPs page in the University Catalog or you can request a plan from your major advisor.

General Education Pathway Requirements: 48 units

See General Education in the University Catalog and the Class Schedule for the most current information on General Education Pathway Requirements and course offerings.

Diversity Course Requirements: 6 units

See Diversity Requirements in the University Catalog. Most courses taken to satisfy these requirements may also apply to General Education .

Literacy Requirement:

See Mathematics and Writing Requirements in the University Catalog. Writing proficiency in the major is a graduation requirement and may be demonstrated through satisfactory completion of a course in your major which has been designated as the Writing Proficiency (WP) course for the semester in which you take the course. Students who earn below a C- are required to repeat the course and earn a C- or higher to receive WP credit. See the Class Schedule for the designated WP courses for each semester. You must pass ENGL 130I or JOUR 130I (or equivalent) with a C- or higher before you may register for a WP course.

Laptop Requirement

To complete this program, the student must have the use of a laptop computer. Please consult with the department for current hardware and software requirements. Students qualify to receive special education discounts on computers and software sold through the Associated Students Bookstore (an Apple authorized campus store). For some programs, in an effort to lower student expenses, bundles consisting of a specially priced Apple laptop computer with the program's required software will be made available at the beginning of each academic year through the Associated Students Bookstore. This laptop computer package is expected to serve the student for the entire length of the program.

Course Requirements for the Major: 57-72 units

Completion of the following courses, or their approved transfer equivalents, is required of all candidates for this degree.

BFA Program Requirements

See Program Admission Prerequisites above.

Upon admittance to the program, you must secure a full-time faculty member, preferably in your area of emphasis, to serve as your mentor. You will be required to meet with your mentor a minimum of two times per semester. You may, along with your mentor, expand this group to include other faculty, graduate students, or community members. The purpose of these meetings is to engage in focused discussions that will assist you in attaining clarity and expertise in the technical and conceptual development of your work. You must maintain a minimum of a 3.0 grade point average within the major's units in order to continue in the program.

A minimum of two semesters of residency is required to complete the BFA Program.

Culminating Exhibition/Project:

A culminating exhibition is required of all students seeking the BFA degree. You will arrange this with the approval of your mentor prior to your final semester in the BFA degree program.

Required Application Materials for the BFA Degree with an Option in Art Studio

1. Prerequisite/application form.

2. Transcripts of all previous college- or university-level course work.

3. 10-15 examples of current work. This work should demonstrate a variety of experiences and an understanding of the methods, materials and concepts in your area of concentration. Details of the submission requirements are reviewed at the Information Meeting.

4. Two recommendation forms completed by art studio faculty for students currently in the BA program in Art, or a minimum of two letters of recommendation for transfer students.

5. A one-page written personal statement about your artistic/professional goals.

6. You are encouraged to submit any additional supporting data, such as records of exhibitions, workshops or special courses, and/or work experience.

7. The faculty reviewers may request a personal interview.

8. An applicant may submit work for the Portfolio Review a maximum of two times.

Major Option Course Requirements: 57-72 units

The following courses, or their approved transfer equivalents, are required dependent upon the option chosen. Students must select one of the following options for completion of the major course requirements.

The Option in Art Studio: 69-72 units

Note: Students choosing the photography emphasis or split emphasis should refer to the requirements under the Photography Group. All other emphasis must follow the requirements listed below.

Lower-Division Requirements: 15 units

1 course required:

3 courses selected from:

1 course selected from:

Students should select courses above which are prerequisites for courses required in their selected area of studio emphasis.

Upper-Division Requirements: 57 units

Art Studio Courses: 27 units

27 units selected from:

Students must select, for a single emphasis, 27 units from one of the following studio course groups to fulfill this requirement. Most studio courses at the 300 level may be taken two times for credit, and 400-level courses four times for credit. A minimum of 12 units must be taken at the 400 level. Painting and drawing courses may be combined for a single emphasis for the BFA degree.

Students with a glass emphasis, where the course selections allow for only 18 units, may fulfill their additional 9 units by taking ARTS 399, ARTS 489, ARTS 499, or by splitting their emphasis between two disciplines (such as glass and sculpture).

Note: Students interested in the Photography emphasis or split emphasis see special requirements under Photography Group.

Ceramics Group

Drawing Group

Glass Design Group

Painting Group

Photography Group

See special requirements at end of option.

Printmaking Group

Sculpture Group

Students may complete the required 27 units in this emphasis with the option of Internship credits (ARTS 489ABC) or Special Problems (ARTS 399ABC), to be arranged with the area faculty.

Studio Electives: 18 units

18 units selected from:

Any upper-division studio Art (ARTS) courses outside of and in addition to the studio group selected above.

Art History Courses: 6 units

Group I: 3 units

1 course selected from:

Group II: 3 units

1 course selected from:

Professional Preparation: 6 units

6 units required:

Note: ARTS 595 must be taken twice for a total of 6 units.

Photography Group Requirements: 69 units

For a split emphasis with photography, students should work with a major advisor.

Lower-Division Requirements: 12 units

2 courses required:

1 course selected from:

1 course selected from:

Upper-Division Requirements: 57 units

Art Studio Courses: 27 units

27 units selected from:

Studio courses at the 300 level may be taken two times for credit, and 400-level courses four times for credit. A minimum of 12 units must be taken at the 400 level.

Studio Electives: 18 units

18 units selected from:

Any upper-division studio Art (ARTS) courses outside the emphasis.

Art History Courses: 6 units

Group I:

1 course selected from:

Group II:

1 course required:

Professional Preparation: 6 units

6 units required:

Note: ARTS 595 must be taken twice for a total of 6 units.

The Option in Electronic Arts: 69-70 units

Required Application Materials for the BFA Degree with an Option in Electronic Arts

The application materials are the same as for the Option in Art Studio except that the portfolio required should include examples of electronic work. These may be submitted on Mac CD or NTSC VHS tape.

Option Core: 18 units

6 courses required:

Technology in Society: 3 units

1 course selected from:

Note: Prerequisite of CDES 102 will be waived for BFA majors.

Professional Preparation: 6 units

6 units required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 595	BFA Senior Studio		3.0	FS	GW
Prerequisites: ENGL 130 or JOUR 130 (or equivalent) with a grade of C- or higher; acceptance into the BFA program or permission of instructor and ARTS 425, ARTS 426, ARTS 427, ARTS 430, ARTS 440, ARTS 450, ARTS 460, ARTS 470, ARTS 476, ARTS 482, or ARTS 483. Cross-disciplinary studio art seminar for students enrolled in the Bachelor of Fine Arts degree options in Art Studio and Electronic Arts. This course affords BFA students the opportunity to develop work for their required culminating exhibition. The course also includes critical discussions and readings on aesthetics, techniques, and professional issues. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. This is an approved Graduation Writing Assessment Requirement course; a grade of C- or higher certifies writing proficiency for majors. (015012)

Note: ARTS 595 must be taken twice for a total of 6 units.

Advising Pattern Course Requirements: 42-43 units

The following courses, or their approved transfer equivalents, are required depending upon the advising pattern chosen. Students must select one of the following advising patterns for completion of the major course requirements.

Intermedia Studio Pattern: 42 units

Art Studio Foundations: 6 units

2 courses selected from:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 227	Introduction to Painting		3.0	FS
This course presents basic instruction in the techniques of painting and in the preparation of various supports. Emphasis will be placed on developing appreciation for the painted surface, and on the expressive potential of shape, color, and texture, as they relate to space and composition. Although some painting exercises are directed by the instructor, student self-motivation is expected. Several projects will be developed by the student. 6 hours activity. (000718)
ARTS 230	Introduction to Printmaking		3.0	FS
Introduction to fine art printmaking processes, with equal emphasis on idea development and technique. Students experience a variety of print methods, such as, etching, linoleum, screen print, and photographic printmaking through demonstrations, lectures, and gallery visits. 6 hours activity. (000730)
ARTS 260	Introduction to Ceramics		3.0	FS
Development of ideas through introduction to handbuilding techniques, using the pinch, coil, slab, and mold methods of construction. Experimentation with a variety of low-fire glazes, and other low-fire surface treatments. 6 hours activity. (000714)
ARTS 270	Introduction to Sculpture		3.0	FS
Introduction to sculpture is a beginning course designed to develop skills in building three-dimensional form by learning to work with a variety of tools and techniques. Materials may include clay, plaster, wood, cardboard, metal, and found objects. Assignments are designed to guide students in their development of concept, content, and personal expression. 6 hours activity. (000726)
ARTS 276	Introduction to Glass Art		3.0	FS
Prerequisites: Faculty permission. An introduction to glass as a visual art medium using the techniques of off-hand glass blowing, sheet glass fabrication, and other related techniques. Emphasis is on the development of sculptural ideas. 6 hours activity. (000717)

Electronic Art Studio: 15 units

15 units required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 350	Intermediate Electronic Arts		3.0	FS
Prerequisites: ARTS 123, ARTS 126, ARTS 250; or faculty permission. Intermediate studies in electronic arts with focus on digital imagemaking. Emphasis on development of personal aesthetics, technical excellence, and understanding of presentation issues surrounding digital media for both print and virtual platforms. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000770)

Repeat for a maximum of 6 units as appropriate.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 450	Advanced Electronic Arts		3.0	FS
Prerequisites: ARTS 350 or faculty permission. Advanced concepts in electronic arts, with emphasis on the relationships between content, form, and media, and the development of personal expression. Studio exploration of digital media to create electronic media artworks. Forms may include interactive multimedia using both CD/DVD and Internet technologies, 3D modeling and rendering, animation, sound, and video. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000753)

Repeat for a maximum of 12 units as appropriate.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 451	Intermedia Studio		3.0	FS
Prerequisites: ARTS 450 and at least one additional 300/400-level art studio course; faculty permission. Advanced concepts in translating electronic media artworks from the virtual world to the tangible with emphasis on integration of traditional fine art media and electronic media. Explorations may include photography/digital imaging, digital painting, digital printmaking, sculpture, installation, public art, and performance works. Conceptual development and studio practice involves integrating vocabularies and production techniques from a diverse palette of artistic methodologies and tools. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000862)

May be repeated to a maximum of 12 units as appropriate.

Studio Electives: 18 units

18 units selected from:

300/400-level Art Studio courses selected with and at the discretion of the BFA committee. Six units may be from focus-related production courses outside of Art, selected with and at the discretion of the BFA committee.

Art History: 3 units

1 course selected from:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTH 482	Film as Visual Art		3.0	FS
The visual aspect of film (without which there would be no film), a history of film imagery, analysis of aesthetic aspects of montage, examination of relationships between film and major nineteenth and twentieth century art movements, avant-garde and underground film, recent developments, including experiments in video and computer-generated imagery. Innovative filmmakers such as Maya Deren and Hans Richter will be studied. 3 hours lecture. (000780)
ARTH 484	History of Photography		3.0	FS
The development of photography from roots in classical and medieval discoveries to the present, its role in historical documentation, its reciprocal influence upon the arts, its contribution to science, and its importance as an extension of human vision. Non-silver processes and fusion of photography with computer and other media will be examined. Ansel Adams, Imogen Cunningham, Alfred Stieglitz, and Edward Weston are among the photographers to be considered. 3 hours lecture. (000773)

Multimedia Studio Pattern: 42 units

Communication Foundations: 6 units

2 courses selected from:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
APCG 117	Concept Design and Storyboarding		3.0	SP
An in-depth look into the pre-production process as it directly pertains to storyboard creation, character development and design, pre-visualization techniques, and principles of concept design. 2 hours lecture, 2 hours activity. (015870)
CDES 103	Writing for Electronic Media		3.0	FS
Prerequisites: ENGL 130. An introduction to the styles and formats used in writing for radio, television, multimedia, and the Web. Writing includes commercials /public service announcements, news, and informational programming. 2 hours lecture, 2 hours activity. (001638)
CDES 141	Media Aesthetics		3.0	FS
This course will explore the elements of visual design as they apply to the production of video and film. An overview of visual literacy will be given, and the application of these elements to the critical analysis of video and film productions will be discussed. Successful completion of this course for majors requires a grade of C or higher. 3 hours lecture. (001649)
CDES 216	Introduction to Digital Audio in Media		3.0	FS
This course provides a theoretical and practical knowledge of digital audio productions techniques for radio, video, and multimedia. Particular emphasis is placed on audio for video and production strategies for effective communication in audio. 2 hours lecture, 2 hours activity. (001652)
CDES 261	Foundations of Electronic Media		3.0	FS
Discussion and analysis of the function, structure, organization, operation, regulation, and economics of the various telecommunication industries, including broadcasting, cable, independent production, and other related new technologies. Successful completion of this course for majors requires a grade of C or higher. Required for enrollment in upper-division Media Arts courses. 3 hours lecture. (001651)

Electronic Art Studio: 12 units

12 units required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 350	Intermediate Electronic Arts		3.0	FS
Prerequisites: ARTS 123, ARTS 126, ARTS 250; or faculty permission. Intermediate studies in electronic arts with focus on digital imagemaking. Emphasis on development of personal aesthetics, technical excellence, and understanding of presentation issues surrounding digital media for both print and virtual platforms. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000770)

Repeat for a maximum of 6 units as appropriate.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 450	Advanced Electronic Arts		3.0	FS
Prerequisites: ARTS 350 or faculty permission. Advanced concepts in electronic arts, with emphasis on the relationships between content, form, and media, and the development of personal expression. Studio exploration of digital media to create electronic media artworks. Forms may include interactive multimedia using both CD/DVD and Internet technologies, 3D modeling and rendering, animation, sound, and video. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000753)

Repeat for a maximum of 12 units as appropriate.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 451	Intermedia Studio		3.0	FS
Prerequisites: ARTS 450 and at least one additional 300/400-level art studio course; faculty permission. Advanced concepts in translating electronic media artworks from the virtual world to the tangible with emphasis on integration of traditional fine art media and electronic media. Explorations may include photography/digital imaging, digital painting, digital printmaking, sculpture, installation, public art, and performance works. Conceptual development and studio practice involves integrating vocabularies and production techniques from a diverse palette of artistic methodologies and tools. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000862)

Studio Electives: 21 units

7 courses selected from:

Note: A minimum of 2 courses must be selected from Art Electives. Up to 18 units of studio electives may be selected from either the Multimedia Group or Video Group.

Art Electives:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 325	Intermediate Drawing		3.0	FS
Prerequisites: ARTS 122; ARTS 125; ARTS 126; or faculty permission. The exploration of a broad number of media and and techniques through a number of structured assignments. The exposure of the drawing student to current technical possibilities which extend and broaden the concept of drawing. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000740)
ARTS 326	Intermediate Life Drawing		3.0	FS
Prerequisites: ARTS 125; ARTS 126; or faculty permission. An emphasis on form development and composition using the human figure. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000752)
ARTS 340	Intermediate Fine Art Photography		3.0	FS
Prerequisites: Introductory photography course on the college level, or faculty permission. Concentration on expressive and aesthetic aspects of photography in fine arts. Emphasis on ability to manipulate and compose with light as a most crucial element in the organization of plastic space. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000786)
ARTS 341	Fine Art Digital Photography		3.0	FS
Prerequisites: ARTS 340 or ARTS 350 or permission of instructor. Exploration of contemporary electronic imaging theories and techniques as they relate to photography. The basic hardware and software and their application in fine art photography are covered in this course. 6 hours activity. This course requires the use of a laptop computer and appropriate software. (000787)
ARTS 425	Advanced Drawing		3.0	FS
Prerequisites: ARTS 325 or faculty permission. An exploration in drawing in depth both as an expressive and descriptive medium. A variety of drawing media and any number of personal directions. Recommended for art majors. Six hours of personal direct-grading system will be used. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000795)
ARTS 426	Advanced Life Drawing		3.0	FS
Prerequisites: ARTS 326 or faculty permission. Study of human form based upon the human figure using a variety of media. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000810)
ARTS 440	Advanced Fine Art Photography		3.0	FS
Prerequisites: ARTS 340. This course provides instruction in the design, construction, and presentation of photographically produced artworks. During the semester, students are required to produce a portfolio quality body of artwork. Theoretical and historical relationships to the student artwork are discussed. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000872)
ARTS 441	Advanced Fine Art Digital Photography		3.0	FS
Prerequisites: ARTS 341. Advanced exploration of contemporary electronic imaging theories and techniques as they relate to photography. This course provides instruction in the design, construction, and presentation of electronically produced photographic artworks. Students produce a portfolio quality body of artwork. 6 hours activity. This course requires the use of a laptop computer and appropriate software. (000873)
ARTS 451	Intermedia Studio		3.0	FS
Prerequisites: ARTS 450 and at least one additional 300/400-level art studio course; faculty permission. Advanced concepts in translating electronic media artworks from the virtual world to the tangible with emphasis on integration of traditional fine art media and electronic media. Explorations may include photography/digital imaging, digital painting, digital printmaking, sculpture, installation, public art, and performance works. Conceptual development and studio practice involves integrating vocabularies and production techniques from a diverse palette of artistic methodologies and tools. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000862)
ARTS 495	Current Topics Studio-Seminar		3.0	FS	GW
Prerequisites: ENGL 130 or JOUR 130 (or equivalent) with a grade of C- or higher; upper-division standing in Art or faculty permission. Current topics and issues in studio art. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. This is an approved Graduation Writing Assessment Requirement course; a grade of C- or higher certifies writing proficiency for majors. (000812)

Multimedia Group Electives:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
CDES 222	Basic Web Design		3.0	FS
Introduction to hypertext markup language (HTML), Web standards, and the Web publication process. Includes practical exercises in the creation and publication of Web pages and the construction of coherent Web sites. 2 hours discussion, 2 hours activity. (001660)
CDES 314	Rich Internet Media Design I		3.0	FS
Prerequisites: Basic computer literacy, faculty permission. A study in the design and development of multimedia. Emphasis on conceptualizing multimedia products for use in education and training, information delivery, and performance support. Hands-on skill development in creating digital elements for use in multimedia, such as graphics, audio, and video and combining these elements into interactive programs. 2 hours lecture, 2 hours activity. (001773)
CDES 322	Advanced Web Design		3.0	FS
Prerequisites: CDES 222. Modern Web technologies for the production and publication of Web pages and sites. Production of client-side and server-side dynamic Web pages to accept user input and retrieve information from databases. Style sheets for controlling Web page appearance. 2 hours lecture, 2 hours activity. (001742)
CDES 323	Human Interface Design		3.0	FA
Prerequisites: CDES 222. The nature of the human interface. Issues in human interface design with strong emphasis on the WWW and E-commerce. Principles of usability and their underpinnings in cognitive psychology. Web accessibility and adaptive technologies. Students critically analyze the usability of existing E-Web sites and recommend changes. 3 hours lecture. (001748)
CDES 414	Rich Internet Media Design II		3.0	SP
Prerequisites: CDES 314. Project-based course designed to develop the student's ability to function as a multimedia development team member. Emphasis on design and development of multimedia programs for use in education and training, information delivery, and performance support. 3 hours discussion. (001774)
CDES 436	Motion Design		3.0	SP
Prerequisites: CDES 334. Introduction to time-based information design and kinetic typography, exploring relationships between music and typographic composition for new media. Topics include historical relationships between music and typography, form and space, hierarchy and structure, texture and depth, time and movement. 2 hours discussion, 2 hours activity. This course requires the use of a laptop computer and appropriate software. (001681)

Note: ARTS 250, ARTS 350, or ART 258 fulfill CDES 214 requirement.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
APCG 330	3-D Computer Modeling		3.0	SP
Prerequisites: APCG 110. This course uses 3-D modeling and animation software in developing 3-D computer models and creating presentations of those models in story-telling still scenes. The tools, techniques, and topics studied include basic and advanced 3-D modeling tools, 3-D scene layout, lighting, texturing, and rendering. 1 hour discussion, 4 hours activity. (002317)
APCG 340	Computer Animation		3.0	FS
Prerequisites: APCG 330. For both majors and non-majors. The concepts of computer imaging and animation are taught in this project-based class. Focus is on the principles of animation and how they apply to current computer animation techniques. This class emphasizes both creative and technical skills. 1 hour discussion, 4 hours activity. (002366)
MUSC 109	Introduction to Music Technology		3.0	FA
Theory and practice of recording, including audio theory and the use of synthesizers, samplers, computers, microphones, recording consoles, and tape machines. 3 hours discussion. (006072)
MUSC 241	Fundamentals of Digital Audio		3.0	FA
Prerequisites: MUSC 109, faculty permission. A study in the fundamentals of digital audio. Emphasis will be on the application of stereo editing, multi-channel recording, digital sequencing, audio for the Web, and time-code. 3 hours discussion. This course requires the use of a laptop computer and appropriate software. (006074)

Video Group Electives:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
CDES 216	Introduction to Digital Audio in Media		3.0	FS
This course provides a theoretical and practical knowledge of digital audio productions techniques for radio, video, and multimedia. Particular emphasis is placed on audio for video and production strategies for effective communication in audio. 2 hours lecture, 2 hours activity. (001652)
CDES 261	Foundations of Electronic Media		3.0	FS
Discussion and analysis of the function, structure, organization, operation, regulation, and economics of the various telecommunication industries, including broadcasting, cable, independent production, and other related new technologies. Successful completion of this course for majors requires a grade of C or higher. Required for enrollment in upper-division Media Arts courses. 3 hours lecture. (001651)
CDES 366	Field Video Production		3.0	FS
Prerequisites: CDES 226, CDES 261. For APCG majors: APCG 112, CDES 103, CDES 141, CDES 216. Theory and techniques of video production designed to develop skills in all aspects of electronic field video production. The course includes all pre-production, production, and post-production videotape editing elements related to the production of all video programs. 2 hours discussion, 3 hours laboratory. (001720)

Note: CDES will allow ARTS 240 to substitute for CDES 206 for BFA majors.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
CDES 464	Advanced Video Editing		3.0	FS
Prerequisites: CDES 366. Involves complicated and detailed editing of video-based materials using digital and analog linear and nonlinear video editing procedures and techniques. 3 hours discussion. (001758)
CDES 466	Studio Video Production		3.0	FS
Prerequisites: CDES 366. Theory and techniques of color video production designed to develop skills in all aspects of video production. This course includes pre-production and production elements related to the production of all video programs. 2 hours discussion, 3 hours laboratory. (001719)
CDES 468	Video Production Workshop		3.0	FA
Prerequisites: CDES 366. Selected video production projects involving advanced techniques not covered in other production courses, including integration of other media forms into complete video programs. 2 hours discussion, 3 hours laboratory. You may take this course more than once for a maximum of 6.0 units. (001759)

Art History: 3 units

1 course selected from:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTH 482	Film as Visual Art		3.0	FS
The visual aspect of film (without which there would be no film), a history of film imagery, analysis of aesthetic aspects of montage, examination of relationships between film and major nineteenth and twentieth century art movements, avant-garde and underground film, recent developments, including experiments in video and computer-generated imagery. Innovative filmmakers such as Maya Deren and Hans Richter will be studied. 3 hours lecture. (000780)
ARTH 484	History of Photography		3.0	FS
The development of photography from roots in classical and medieval discoveries to the present, its role in historical documentation, its reciprocal influence upon the arts, its contribution to science, and its importance as an extension of human vision. Non-silver processes and fusion of photography with computer and other media will be examined. Ansel Adams, Imogen Cunningham, Alfred Stieglitz, and Edward Weston are among the photographers to be considered. 3 hours lecture. (000773)

Computer Animation Studio Pattern: 42-43 units

Computer Science Foundations: 3-4 units

1 course selected from:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
CSCI 101	Introduction to Computer Science		3.0	FS
Students who have had limited experience with computers should take CSCI 101 before CSCI 111. CSCI 101 provides an overview of the fundamentals of computer science. Number systems and data representation are introduced. An overview of hardware, including the control unit, memory, the ALU, and I/O is provided. Software is introduced with an overview of operating systems, programming languages, applications, and software tools. Students are exposed to common operating systems and applications. Student also design and implement several programs. 2 hours discussion, 2 hours activity. (002280)
CSCI 111	Programming and Algorithms I		4.0	FS
Prerequisites: At least one year of high school algebra and strong computer skills or CSCI 101. A first-semester programming course, providing an overview of computer systems and an introduction to problem solving and software design using procedural object-oriented programming languages. Coverage includes the software life cycle, as well as algorithms and their role in software design. Students are expected to design, implement, and test a number of programs. 3 hours lecture, 2 hours activity. (002281)

Writing/Storyboard Preparation: 3 units

1 course required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
APCG 117	Concept Design and Storyboarding		3.0	SP
An in-depth look into the pre-production process as it directly pertains to storyboard creation, character development and design, pre-visualization techniques, and principles of concept design. 2 hours lecture, 2 hours activity. (015870)

Studio: 33 units

7 courses required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
APCG 330	3-D Computer Modeling		3.0	SP
Prerequisites: APCG 110. This course uses 3-D modeling and animation software in developing 3-D computer models and creating presentations of those models in story-telling still scenes. The tools, techniques, and topics studied include basic and advanced 3-D modeling tools, 3-D scene layout, lighting, texturing, and rendering. 1 hour discussion, 4 hours activity. (002317)
APCG 340	Computer Animation		3.0	FS
Prerequisites: APCG 330. For both majors and non-majors. The concepts of computer imaging and animation are taught in this project-based class. Focus is on the principles of animation and how they apply to current computer animation techniques. This class emphasizes both creative and technical skills. 1 hour discussion, 4 hours activity. (002366)
ARTS 260	Introduction to Ceramics		3.0	FS
Development of ideas through introduction to handbuilding techniques, using the pinch, coil, slab, and mold methods of construction. Experimentation with a variety of low-fire glazes, and other low-fire surface treatments. 6 hours activity. (000714)
ARTS 325	Intermediate Drawing		3.0	FS
Prerequisites: ARTS 122; ARTS 125; ARTS 126; or faculty permission. The exploration of a broad number of media and and techniques through a number of structured assignments. The exposure of the drawing student to current technical possibilities which extend and broaden the concept of drawing. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000740)
ARTS 326	Intermediate Life Drawing		3.0	FS
Prerequisites: ARTS 125; ARTS 126; or faculty permission. An emphasis on form development and composition using the human figure. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000752)
ARTS 350	Intermediate Electronic Arts		3.0	FS
Prerequisites: ARTS 123, ARTS 126, ARTS 250; or faculty permission. Intermediate studies in electronic arts with focus on digital imagemaking. Emphasis on development of personal aesthetics, technical excellence, and understanding of presentation issues surrounding digital media for both print and virtual platforms. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000770)

Repeat for a maximum of 6 units as appropriate.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 450	Advanced Electronic Arts		3.0	FS
Prerequisites: ARTS 350 or faculty permission. Advanced concepts in electronic arts, with emphasis on the relationships between content, form, and media, and the development of personal expression. Studio exploration of digital media to create electronic media artworks. Forms may include interactive multimedia using both CD/DVD and Internet technologies, 3D modeling and rendering, animation, sound, and video. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000753)

Repeat for a maximum of 12 units as appropriate.

12 units selected from:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
APCG 331	3-D Character Modeling		3.0	FA
Prerequisites: APCG 330. A study of the necessary principles and techniques of creating digital 3-D characters. Students learn the necessary skills for modeling characters, creating effective anatomy, and rigging characters for animation purposes. 1 hour lecture, 4 hours activity. (020241)
APCG 345	Advanced Animation Pre-Production and Story Development		3.0	FS	GW
Prerequisites: ENGL 130 or JOUR 130 (or equivalent) with a grade of C- or higher, APCG 117. Concentration on story development as it directly relates to Computer Animation. Students write a treatment, script, and storyboard for an animation project. Emphasis is placed on understanding the story structure, writing interesting dialogue and developing an in-depth storyboard. The course gives students a practical approach to creating the pre-production component of an animated "short." 3 hours lecture. This is an approved Graduation Writing Assessment Requirement course; a grade of C- or higher certifies writing proficiency for majors. (015871)
APCG 389	Industry Internship		1.0 -3.0	FS
Prerequisites: Faculty permission. This internship is offered for 1.0-3.0 units. Students must register directly with a supervising faculty member. You may take this course more than once for a maximum of 15.0 units. Credit/no credit grading. (020127)
APCG 398	Special Topics		1.0 -3.0	FS
This course is for special topics offered for 1.0-3.0 units. Typically the topic is offered on a one-time-only basis and may vary from term to term and be different for different sections. See the Class Schedule for the specific topic being offered. 3 hours lecture. (015892)
APCG 399	Special Problems		1.0 -3.0	FS
Prerequisites: Faculty permission. This course is an independent study offered for 1.0-3.0 units. You must register directly with a supervising faculty member. You may take this course more than once for a maximum of 6.0 units. Credit/no credit grading. (020135)
APCG 441	3-D Character Animation		3.0	FA
Prerequisites: APCG 340. This course covers the study of motion, timing and acting as they apply to animated characters. Emphasis is on the performance of the character and how it reads to the audience. Techniques and methods for facial expressing, lip-synching, and staging are explored. 1 hour lecture, 4 hours activity. (020245)
APCG 445	Advanced Animation Production		3.0	FA
Prerequisites: APCG 340, APCG 345. The computer animation production process is taught in this class. Working from a script, storyboard, and/or animatic, students complete an "animated short" with accompanying sound, music, and visual effects. Emphasis is on working as a member of a computer animation team, similar to a real-world production facility. 3 hours discussion. (002367)
APCG 498	Special Topics		1.0 -3.0	FS
This course is for special topics offered for 1.0-3.0 units. Typically the topic is offered on a one-time-only basis and may vary from term to term and be different for different sections. See the Class Schedule for the specific topic being offered. 3 hours lecture. (015891)
ARTS 340	Intermediate Fine Art Photography		3.0	FS
Prerequisites: Introductory photography course on the college level, or faculty permission. Concentration on expressive and aesthetic aspects of photography in fine arts. Emphasis on ability to manipulate and compose with light as a most crucial element in the organization of plastic space. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000786)
ARTS 361	Intermediate Ceramics		3.0	FS
Prerequisites: ARTS 260 or equivalent experience in low-fire hand-building techniques; ARTS 122; ARTS 125. Aesthetic exploration of ideas, using the potter's wheel and/or hand-building techniques to create sculptural forms. Development of techniques in basic wheel-throwing and/or hand-building, clay body formulation, investigation of surface enrichment techniques, and kiln firing. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000746)
ARTS 362	Intermediate Ceramics: Surface		3.0	FS
Prerequisites: ARTS 361 or faculty permission. This course provides a variety of approaches to surface enrichment techniques. The execution of the surface information learned in this course provides a more sophisticated avenue for expression. Includes individual approaches to problem solving, with an emphasis on concept development and the refinement of technical skills and related craftsmanship. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (000750)
ARTS 425	Advanced Drawing		3.0	FS
Prerequisites: ARTS 325 or faculty permission. An exploration in drawing in depth both as an expressive and descriptive medium. A variety of drawing media and any number of personal directions. Recommended for art majors. Six hours of personal direct-grading system will be used. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000795)
ARTS 426	Advanced Life Drawing		3.0	FS
Prerequisites: ARTS 326 or faculty permission. Study of human form based upon the human figure using a variety of media. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000810)
ARTS 440	Advanced Fine Art Photography		3.0	FS
Prerequisites: ARTS 340. This course provides instruction in the design, construction, and presentation of photographically produced artworks. During the semester, students are required to produce a portfolio quality body of artwork. Theoretical and historical relationships to the student artwork are discussed. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000872)
ARTS 450	Advanced Electronic Arts		3.0	FS
Prerequisites: ARTS 350 or faculty permission. Advanced concepts in electronic arts, with emphasis on the relationships between content, form, and media, and the development of personal expression. Studio exploration of digital media to create electronic media artworks. Forms may include interactive multimedia using both CD/DVD and Internet technologies, 3D modeling and rendering, animation, sound, and video. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000753)

ARTS 450 may be taken more than once for credit and in addition to core.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 451	Intermedia Studio		3.0	FS
Prerequisites: ARTS 450 and at least one additional 300/400-level art studio course; faculty permission. Advanced concepts in translating electronic media artworks from the virtual world to the tangible with emphasis on integration of traditional fine art media and electronic media. Explorations may include photography/digital imaging, digital painting, digital printmaking, sculpture, installation, public art, and performance works. Conceptual development and studio practice involves integrating vocabularies and production techniques from a diverse palette of artistic methodologies and tools. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000862)
ARTS 460	Advanced Ceramics		3.0	FS
Prerequisites: ARTS 362 or ARTS 363 or faculty permission. In-depth study and development, with emphasis on individual ideas and directions. Concentration on creating a personal vocabulary of concepts, construction methods, and surface treatments as a means of expression. Discussions of contemporary ceramic issues, and professional procedures for the ceramic artist. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. (000802)
ARTS 489	Internship Program in Art		1.0 -3.0	FS
This course is an internship offered for 1.0-3.0 units. You must register directly with a supervising faculty member. Supervised, out-of-classroom art-related work experience within the University (as in galleries and the slide room), and in connection with community programs and businesses (as in museums, galleries, art centers, etc.). Open to art majors and minors at junior and senior levels with a minimum GPA of 2.0 or to graduates with a minimum GPA of 3.0. 3 hours supervision. You may take this course more than once for a maximum of 15.0 units. (000870)
ARTS 495	Current Topics Studio-Seminar		3.0	FS	GW
Prerequisites: ENGL 130 or JOUR 130 (or equivalent) with a grade of C- or higher; upper-division standing in Art or faculty permission. Current topics and issues in studio art. 6 hours activity. You may take this course more than once for a maximum of 12.0 units. This is an approved Graduation Writing Assessment Requirement course; a grade of C- or higher certifies writing proficiency for majors. (000812)
CSCI 389	Industry Internship		1.0 -3.0	FS
Prerequisites: CSCI 311 with a grade of C- or higher, department permission. This internship is offered for 1.0-3.0 units. Students must register directly with a supervising faculty member. 3 hours supervision. You may take this course more than once for a maximum of 15.0 units. Credit/no credit grading. (002342)
MUSC 109	Introduction to Music Technology		3.0	FA
Theory and practice of recording, including audio theory and the use of synthesizers, samplers, computers, microphones, recording consoles, and tape machines. 3 hours discussion. (006072)
MUSC 241	Fundamentals of Digital Audio		3.0	FA
Prerequisites: MUSC 109, faculty permission. A study in the fundamentals of digital audio. Emphasis will be on the application of stereo editing, multi-channel recording, digital sequencing, audio for the Web, and time-code. 3 hours discussion. This course requires the use of a laptop computer and appropriate software. (006074)

Art History: 3 units

1 course required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTH 482	Film as Visual Art		3.0	FS
The visual aspect of film (without which there would be no film), a history of film imagery, analysis of aesthetic aspects of montage, examination of relationships between film and major nineteenth and twentieth century art movements, avant-garde and underground film, recent developments, including experiments in video and computer-generated imagery. Innovative filmmakers such as Maya Deren and Hans Richter will be studied. 3 hours lecture. (000780)

The Option in Interior Design: 57 units

Laptop Requirement

To complete this program, the student must have the use of a laptop computer. Please consult with the department for current hardware and software requirements. Students qualify to receive special education discounts on computers and software sold through the Associated Students Bookstore (an Apple authorized campus store). For some programs, in an effort to lower student expenses, bundles consisting of a specially priced Apple laptop computer with the program's required software will be made available at the beginning of each academic year through the Associated Students Bookstore. This laptop computer package is expected to serve the student for the entire length of the program.

5 courses required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 250	Introduction to Digital Media		3.0	FS
This is a foundation computer course for studio artists. The course covers basic instruction using the computer for painting, drawing, image processing, photographic composites, words as art, animation, research, and presentation. Emphasis is on conceptual and creative processes. Art and design principles, aesthetic decision making, and visual effectiveness are addressed. Basic drawing skills strongly recommended. 6 hours activity. (000737)
IDES 115	Introduction to Interior Design		3.0	FS
This course provides the student with an overview of the interior design profession. Through a survey of significant spaces and innovations in styles and furnishings students examine how interior design affects human activity. Life safety codes and human performance are emphasized. 3 hours lecture. (000732)
IDES 231	Graphics I: Architectural Drafting for Interior Design		3.0	FS
Prerequisites: IDES 115. This course is an introduction to the tools, techniques, and principles of architectural drafting, graphic conventions, and lettering. Students measure actual sites and study the use of dimensional orthographic and three-dimensional paraline drawing techniques. 2 hours lecture, 2 hours activity. (020509)
IDES 232	Graphics II: Design Development and Communication		3.0	FS
Prerequisites: ARTS 125, IDES 115. The ability to sketch design ideas confidently is a valuable tool for designers. This course emphasizes the skill of drawing quickly by teaching visual note taking, generating visual ideas, working from non-visual sources, and establishing a method for accurate perspective drawing. Color rendering techniques are introduced that add surface texture, tonality, reflections, and shades and shadows. 2 hours lecture, 2 hours activity. (000782)
IDES 251	Creative Thinking and Design Process		3.0	FS
Prerequisite: ARTS 122, ARTS 123, IDES 115, or faculty permission. This course emphasizes a systematic approach to the interior design process: conceptualization, development, and synthesis. Through a series of exercises that focus on fundamental design elements and principles, students shall explore several two and three dimensional communication techniques to effectively present their design ideas. A grade of C or higher is required in this course to continue in the Interior Design BFA program. 2 hours lecture, 2 hours activity. You may take this course more than once for a maximum of 6.0 units. (020621)

3 units selected from:

Select courses in consultation with the major advisor.

Upper-Division Requirements: 30 units

7 courses required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTS 489	Internship Program in Art		1.0 -3.0	FS
This course is an internship offered for 1.0-3.0 units. You must register directly with a supervising faculty member. Supervised, out-of-classroom art-related work experience within the University (as in galleries and the slide room), and in connection with community programs and businesses (as in museums, galleries, art centers, etc.). Open to art majors and minors at junior and senior levels with a minimum GPA of 2.0 or to graduates with a minimum GPA of 3.0. 3 hours supervision. You may take this course more than once for a maximum of 15.0 units. (000870)

Note: Students must take at least 3 units of internship.

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
IDES 333	Graphics III: CAD for Interior Design		3.0	FS
Prerequisite: IDES 231. This course introduces the use of the microcomputer as a tool for interior design illustration, drafting, and design development. A fundamental computer graphics course for interior design students, this course builds skills and technical knowledge in image processing, two-dimensional drawing and three-dimensional modeling of building interiors. 6 hours activity. This course requires the use of a laptop computer and appropriate software. (000766)
IDES 372	Interior Materials and Finishes		3.0	FA
Prerequisite: IDES 231. This course focuses on the materials available to the interior designer and their characteristics, sources, and applications. Properties and appropriate uses for interior construction and finish materials are explored. Through lectures, presentations, and the preparation of construction details, students become familiar with the application of a wide variety of interior materials and finishes. Green design and sustainability are examined. 2 hours lecture, 2 hours activity. (000734)
IDES 373	Interior Lighting and Color		3.0	SP
Prerequisites: ARTS 122, IDES 231, IDES 251. This course focuses on lighting design based upon critical awareness of the luminous environment. Lighting fundamentals and applications for various types of interior environments are emphasized. Energy conservation and efficiency are also examined. This course addresses the relationship of interior lighting and color. Students explore the application of color theory to interior design. 2 hours lecture, 2 hours activity. (000768)
IDES 434	Graphics IV: Construction Documentation for Interior Design		3.0	FS
Prerequisites: IDES 231. This course emphasizes the overview of interior design construction and creating a set of documentation. The course covers advanced problems in design and detailing of interior finish systems such as interior architecture and cabinetry. Exploration and production of interior mechanical and millwork drawings and construction documents. Integration of building codes and life safety issues. 2 hours lecture, 2 hours activity. (020727)
IDES 474	Building Systems and Environmental Technologies		3.0	FS
Prerequisites: IDES 231, IDES 251, IDES 372 or faculty permission. This course focuses on interior building systems in relation to human sensory reactions, psychological factors, health, safety, and comfort. Building codes relating to building systems are addressed. The vocabulary and concepts of environmental technologies related to interior design are examined. 2 hours lecture, 2 hours activity. (020730)
IDES 485	Professional Practice and Portfolio		3.0	FS	GW
Prerequisite: ENGL 130 or JOUR 130 (or equivalent) with a grade of C- or higher; 6 units of upper division IDES-studio electives. This course familiarizes students with the everyday business, legal, financial, and ethical considerations of the practicing designer. A case study is used to explain the formation of a design business, its operations and designer/client and designer/vendor relationships; project scope analysis and contract analysis for residential and contract projects; insurance, fees and compensation; public relations; and dispute resolution. This course provides an introduction to various formats and processes used in creating a portfolio. Organization and graphic solutions are emphasized for portfolio development. 2 hours lecture, 2 hours activity. This is an approved Graduation Writing Assessment Requirement course; a grade of C- or higher certifies writing proficiency for majors. (000866)

3 courses selected from:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
IDES 452	Residential Design		3.0	FA
Prerequisites: IDES 231, IDES 232, IDES 251. Conceptual process, design theory, and programmatic concerns involved in residential interior design with an emphasis on professional applications. Building codes related to residential spaces are addressed. Green design and sustainability are examined. 2 hours lecture, 2 hours activity. (000817)
IDES 453	Corporate and Institutional Design		3.0	SP
Prerequisites: IDES 231, IDES 232, IDES 251. Students design corporate offices and institutional spaces such as day-care centers and libraries. Practical issues such as compliance with building codes, sustainability, and use of modular furniture systems are addressed in relation to building types. 2 hours lecture, 2 hours activity. (000820)
IDES 454	Hospitality Design		3.0	FS
Prerequisites: IDES 231, IDES 232, IDES 251. This course emphasizes the elements used by the designer in the development of hospitality interior spaces such as restaurants, clubs, coffee shops, and hotels. Both conceptual and practical issues are explored relative to site analysis, programming, space planning, green design, circulation, volume, furnishings, color, and texture in the design of interior space. 2 hours lecture, 2 hours activity. (000863)
IDES 455	Retail and Exhibition Design		3.0	FA
Prerequisites: IDES 231, IDES 232, IDES 251. This course introduces students to design branded environments, showroom, tradeshow exhibit, retail store, and museum. Students learn about design concept, development, space utilization, fixtures, and display as well as the role the interior designer plays in branding and the selling of a product. 2 hours lecture, 2 hours activity. (020728)
IDES 456	Furniture Design and Fabrication		3.0	FA
Prerequisites: IDES 231, IDES 232, IDES 251. This design studio focuses on the aesthetic and functional issues related to the creation of custom freestanding furniture. Design and production of both hard and soft goods are covered. Special attention is given to anthropometric and ergonomic considerations, as well as the fabrication materials and construction methods. Students produce full scale furniture of their own design. 6 hours activity. (020729)

Art History Requirements: 6 units

2 courses required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
ARTH 480	Early History of Interiors, Furnishings, and Architecture		3.0	FS
Prerequisites: ARTH 110, ARTH 120. This survey acquaints students with the language of form and space and stylistic vocabularies related to interiors, furnishings, and architecture from the Egyptians through 18th century European. Some aspects of Asian and Islamic furnishings and decorative arts will be included as influences on European design. 3 hours lecture. (000775)
ARTH 481	Modern History of Interiors, Furnishings, and Architecture		3.0	FS
Prerequisites: ARTH 130. Survey of the language of form and space and stylistic vocabularies related to interiors, furnishings, and architecture for 19th and 20th century European and American art from the Colonial period. Styles such as Arts and Crafts, Art Nouveau, Art Deco, Bauhaus, Memphis, and Post Modern will be addressed, and architects and designers such as William Morris, Frank Lloyd Wright, Eileen Gray, and LeCorbusier will be included. 3 hours lecture. (000778)

Interior Design Capstone Studio: 3 units

1 course required:

SUBJ NUM	Title	Sustainable	Units	Semester Offered	Course Flags
IDES 551	Senior Design Studio		3.0	FS
Prerequisites: IDES 474 and 9 units of upper-division IDES studio electives. This course is the culminating interior design studio project of the BFA professional level degree program. Students implement the project identified and researched in the course. Students research, develop, and analyze data and design criteria for a substantial project involving diverse populations. This advanced studio requires students to incorporate the skills and knowledge gained throughout their studies to create a comprehensive project, including program, presentation drawings, models, detail drawings and specifications. 6 hours activity. You may take this course more than once for a maximum of 6.0 units. (020731)

Electives Requirement:

To complete the total units required for the bachelor's degree, select additional elective courses from the total University offerings. You should consult with an advisor regarding the selection of courses which will provide breadth to your University experience and possibly apply to a supportive second major or minor.

Grading Requirement:

All courses taken to fulfill major course requirements must be taken for a letter grade except those courses specified by the department as Credit/No Credit grading only.

Advising Requirement:

Advising is mandatory for all majors in this degree program. Consult your undergraduate advisor for specific information.