This is an archived version of the University Catalog and is no longer being maintained. References to people, offices, policies, and web links may be outdated. View the current catalog or email catalog@csuchico.edu for updated information. Students who have catalog rights to this version of the catalog should check with an advisor for graduation requirements.

Skip to Side Navigation Skip to Content Skip to Accessibility Settings

The Bachelor of Science in Mechatronic Engineering

Mechatronic Engineering is a new discipline that combines many of the skills of a mechanical engineer with those of a computer engineer and an electrical engineer. The mechatronic engineering graduate is prepared to design "intelligent" products such as cars that drive themselves, laser printers, self assembling machines and robots.

The Mechatronic Engineering program is accredited by the Engineering Accreditation Commission (EAC) of the Accreditation Board for Engineering and Technology (ABET), 111 Market Place, Suite 1050, Baltimore, MD 21202-4012, telephone: (410) 347-7700.

Mechatronic Engineering Program Mission

The mechatronic engineering program has the primary mission of providing students a high-quality undergraduate engineering education with

  1. a curriculum that is firmly grounded in engineering fundamentals.
  2. a faculty that provides superior teaching and mentoring both in and out of the classroom.
  3. a faculty whose focus is undergraduate education.
  4. class sizes that encourage student participation.
  5. project experiences that build on fundamentals and develop team skills.
  6. facilities and equipment that are readily accessible.
  7. an environment that is conducive to learning and encourages students from different genders and backgrounds.

The faculty is committed to offering a broad undergraduate experience that will promote professional growth and prepare students for a variety of engineering careers, graduate studies, and continuing education

Mechatronic Engineering Program Educational Objectives

The Mechatronic Engineering Program’s Educational Objectives are goals for its graduates to achieve a few years after graduation. Mechatronic engineering graduates will:

  • 1 .Practice in engineering-related fields chosen from a broad range of industries
  • 2. Recognize the need and have the ability to engage in continuing learning to adapt to evolving professions and to advance professionally
  • 3. Become contributing members of the society with an understanding of the inherent and unavoidable impact of practicing engineering

    Mechatronic Engineering Program Outcomes

    Mechatronic Engineering Program graduates must have:

    1. an ability to apply knowledge of mathematics, science, and engineering.
    2. an ability to design experiments to evaluate the performance of a mechatronic system or component with respect to specifications.
    3. an ability to conduct experiments, as well as analyze and interpret data.
    4. an ability to design a mechatronic system, component, or process to meet desired needs within realistic constraints.
    5. an ability to function effectively as members of multidisciplinary teams.
    6. an ability to define engineering problems.
    7. an ability to solve engineering problems.
    8. an understanding of professional ethical responsibility.
    9. an ability to communicate technical matters effectively in oral form.
    10. an ability to communicate technical matters effectively in written form.
    11. an ability to communicate technical matters effectively in graphical form.
    12. the broad education necessary to understand the impact of engineering solutions in a global, economic, environmental and societal context.
    13. a recognition of the need for, and an ability to engage in, life-long learning.
    14. a knowledge of contemporary issues.
    15. an ability to use the techniques, skills, and modern mechatronic engineering tools necessary for engineering practice.

    Mechatronic Engineering Design Experience

    The design experience for mechatronic engineers is integrated throughout the curriculum. The courses which include design experiences are:

    CSCI 111 - Programming and Algorithms I

    EECE 144 - Logic Design Fundamentals

    EECE 315 - Electronics I

    EECE 237 - Embedded Systems Development

    EECE 344 - Digital Systems Design

    MECA 140 - Introduction to Engineering Design and Automation

    MECA 440A- Mechatronic Engineering Design Project I

    MECA 440B- Mechatronic Engineering Design Project II

    MECH 340 - Mechanical Engineering Design

    At the freshman level, students learn about the design process and are introduced to designing automated systems in MECA 140 and logic networks are designed in EECE 144. At the sophomore level, software design experience teaches students to think logically in developing efficient, structured computer programs in CSCI 111. At the junior level, there is an opportunity to learn about safety, failure, reliability, codes and standards, and economic considerations, while carrying out detailed design of mechanical components in MECH 340, and electrical circuits and systems in EECE 237, EECE 315, and EECE 344. In the final senior project (MECA 440A and MECA 440B), students are expected to exercise what they learned throughout the preceding design courses in a final project that includes assembly and testing, as well as the more global aspects of design including product realization, economic factors, environmental issues, and social impact. Together, these experiences prepare graduates to be successful practitioners with an awareness of the multitude of issues involved.

    Total Course Requirements for the Bachelor's Degree: 128 units

    See Bachelor's Degree Requirements in the University Catalog for complete details on general degree requirements. A minimum of 40 units, including those required for the major, must be upper division.

    A suggested Major Academic Plan (MAP) has been prepared to help students meet all graduation requirements within four years. You can view MAPs on the Degree MAPs page in the University Catalog or you can request a plan from your major advisor.

    General Education Pathway Requirements: 48 units

    See General Education in the University Catalog and the Class Schedule for the most current information on General Education Pathway Requirements and course offerings.

    This major has approved GE modification(s). See below for information on how to apply these modification(s).

    • Take CMST 131 for Oral Communication (A1)
    • Critical Thinking (A3) is waived.
    • Take only one course in either Arts (C1) or Humanities (C2). The other is waived.
    • MECH 340 is an approved major course substitution for either Individual & Society (D1) or Societal Institutions (D2). You must complete one additional D1 or D2 course.
    • MECA 440B is an approved major course substitution for Learning for Life (E).
    • EECE 311 fulfills Upper-Division Natural Sciences.
    • MECA 440A is an approved GE Capstone substitution.

    Diversity Course Requirements: 6 units

    See Diversity Requirements in the University Catalog. Most courses taken to satisfy these requirements may also apply to General Education .

    Both courses must also satisfy one of the General Education Requirements in order for 127 units to fulfill all requirements for the Mechatronic Engineering degree.

    Course Requirements for the Major: 101 units

    Completion of the following courses, or their approved transfer equivalents, is required of all candidates for this degree.

    Enrollment in any mathematics course requires a grade of C- or higher in all prerequisite courses or their transfer equivalents.

    Lower-Division Requirements: 59 units

    20 courses required:

    SUBJ NUM Title Sustainable Units Semester Offered Course Flags
    Prerequisites: MATH 121, PHYS 204A.
    Force systems, moments, equilibrium, centroids, and moments of inertia. 2 hours discussion, 2 hours activity. (001489)
    Prerequisites: Completion of ELM requirement; second-year high school algebra; one year high school chemistry. (One year of high school physics and one year of high school mathematics past Algebra II are recommended.)
    Principles of chemistry for students in science and engineering programs. Topics include atoms, molecules and ions, reactions, stoichiometry, the periodic table, bonding, chemical energy, gases, and solution chemistry. The laboratory sequence supports the above topics including both qualitative and quantitative experiments, analysis of data, and error propagation. 3 hours lecture, 3 hours laboratory. This is an approved General Education course. (001816)
    Prerequisite: Completion of ELM requirement.
    A first-semester programming course, providing an overview of computer systems and an introduction to problem solving and software design using procedural object-oriented programming languages. Coverage includes the software life cycle, as well as algorithms and their role in software design. Students are expected to design, implement, and test a number of programs. 3 hours lecture, 2 hours activity. (002281)
    Definition and properties of switching algebra. Minimization of algebraic function. Use of Karnaugh maps for simplification. Design of combinational logic networks. Design of sequential logic devices including flip-flops, registers, and counters. Analysis and applications of digital devices. Analysis and design of synchronous and asynchronous sequential state machines, state table derivation and reduction. Use of such CAD tools for schematic capture and logic device simulations. 3 hours lecture, 2 hours activity. (002614)
    Prerequisites: MATH 121, PHYS 204B.
    DC and sinusoidal circuit analysis, including resistive, capacitive, and inductive circuit elements and independent sources. Ideal transformer. Thevenin and Norton circuit theorems and superposition. Phasors, impedance, resonance, and AC power. Three-phase AC Circuit analysis. 3 hours discussion. (002519)
    Corequisites: EECE 211.
    Experiments to reinforce the principles taught in EECE 211. 2 hours activity. (002520)
    Prerequisite: CSCI 111.
    This course presents the concepts and techniques associated with developing low level Embedded Systems Applications, using both Assembly Language and C. Topics include microprocessor architecture concepts, instruction set architectures, Assembly Language programming, data representations, interrupt handling and execution modes, low level C programming, and the use of on-chip and external peripherals. 3 hours lecture. (021437)
    Prerequisites: Completion of ELM requirement; both MATH 118 and MATH 119 (or college equivalent); first-year freshmen who successfully completed trigonometry and precalculus in high school can meet this prerequisite by achieving a score that meets department guidelines on a department administered calculus readiness exam.
    Limits and continuity. The derivative and applications to related rates, maxma and minima, and curve sketching. Transcendental functions. An introduction to the definite integral and area. 4 hours discussion. This is an approved General Education course. (005506)
    Prerequisites: MATH 120.
    The definite integral and applications to area, volume, work, differential equations, etc. Sequences and series, vectors and analytic geometry in 2 and 3-space, polar coordinates, and parametric equations. 4 hours discussion. (005507)
    Prerequisites: MATH 121.
    First order separable, linear, and exact equations; second order linear equations, Laplace transforms, series solutions at an ordinary point, systems of first order linear equations, and applications. 4 hours discussion. (005509)
    Corequisite: PHYS 204A.
    This course is also offered as MECH 140.
    Introduces the design engineering process. Hands-on use of sensors, pneumatics, stepper motors, bearings, couplings, gears, belts, pulleys, and framing materials. Topics include AC and DC motor control, simple electrical circuits, machine controllers, PLC programming, testing and analysis of results, budgeting, and bills of materials. Teams design and build a proof-of-concept system to verify their design. 1 hour discussion, 3 hours laboratory. (005401)
    Corequisites: MECH 100L.
    Introduction to engineering graphics. Orthographic projection, auxiliary views, isometric views, dimensioning, tolerancing, drawing standards, working drawings, free-hand sketching, solid modeling. 1 hour discussion. (015811)
    Corequisites: MECH 100.
    Introduction to solid modeling using a parametric, feature-based application software, SolidWorks. Solid modeling of parts and assemblies, detail and assembly drawings. 3 hours laboratory. (020257)
    Prerequisites: MECH 100 and MECH 100L.
    Drawing standards, geometric dimensioning and tolerancing, working drawings, product data management, intermediate solid modeling, introduction to Rapid Prototyping and specialized graphic applications. 1 hour lecture, 3 hours laboratory. (015854)
    Prerequisites: PHYS 204A; CHEM 111.
    Processing, structure, properties, and performance of engineering materials. Applied knowledge of material properties as engineering design parameters. Advanced manufacturing processes, including microfabrication are discussed. 3 hours discussion. (005402)
    Corequisite: MECH 210.
    Standards and procedures for materials testing. Hands-on experience with commonly used equipment for materials testing. Test data acquisition and integration for material properties. Presentation of test data and findings in technical reports. 3 hours laboratory. (021645)
    Prerequisites: High school physics or faculty permission. Concurrent enrollment in or prior completion of MATH 121 (second semester of calculus) or equivalent.
    Vectors, kinematics, particle dynamics, friction, work, energy, power, momentum, dynamics and statics of rigid bodies, oscillations, gravitation, fluids. Calculus used. A grade of C- or higher is required before progressing to either PHYS 204B or PHYS 204C. 3 hours discussion, 3 hours laboratory. This is an approved General Education course. (007401)
    Prerequisites: MATH 121, PHYS 204A with a grade of C- or higher.
    Charge and matter, electric field, Gauss' law, electric potential, capacitors and dielectrics, current and resistance, magnetic field, Ampere's law, Faraday's law of induction, magnetic properties of matter, electromagnetic oscillations and waves. Calculus used. 3 hours discussion, 3 hours laboratory. (007402)
    Prerequisites: MATH 121, PHYS 204A with a grade of C- or higher.
    Temperature, first and second law of thermodynamics, and kinetic theory. Waves in elastic media, standing waves and resonance, and sound. Ray and wave optics, reflection, refraction, lenses, mirrors, diffraction, and polarization. Selected topics in modern physics. Calculus used. 3 hours discussion, 3 hours laboratory. (007403)
    This course is designed to familiarize the student with the basic concepts of manufacturing processes with an emphasis on using sustainable practices. Students gain an understanding of the principle manufacturing materials and processes, learn how to solve manufacturing problems, and understand how Life Cycle Analysis and Reduce, Reuse, Recycle principles can be integrated into manufacturing processes. 2 hours discussion, 3 hours laboratory. (005149)

    Upper-Division Requirements: 42 units

    11 courses required:

    SUBJ NUM Title Sustainable Units Semester Offered Course Flags
    Prerequisites: CIVL 211 with a grade of C- or higher; MATH 260 and MECH 210 (may be taken concurrently).
    Strength and elastic properties of materials of construction; tension, compression, shear, and torsion stresses; deflection and deformation; stress analysis of beams and columns. 4 hours discussion. (001491)
    Prerequisites: EECE 211; MATH 260 (may be taken concurrently).
    Circuit analysis techniques for networks with both independent and dependent sources. Network topology. Natural and forced responses for RLC circuits. Complex frequency, poles, and zeros. Magnetically coupled circuits and two-port networks. Introduction to linear algebra, circuit simulation using PSPICE, and mathematical analysis using MATLAB. 4 hours discussion. (002527)
    Prerequisites: EECE 211, EECE 211L; EECE 311 and MATH 260 (may be taken concurrently).
    Ideal diodes. Zener diodes and regulation. Photodiodes and solar cells. Biasing and DC behavior of bipolar transistors. JFETs and MOSFETS. Small-signal AC equivalent circuits. Single-state transistor amplifiers. Low-frequency response. Discrete feedback amplifiers. 3 hours lecture, 3 hours laboratory. (002530)
    Prerequisites: EECE 144, EECE 237; either EECE 110 or both EECE 211 and EECE 211L.
    Extends the study of digital circuits to LSI and VLSI devices. Microcontrollers, architecture, bus organization and address decoding. Design concepts for microcontroller systems, including A/D and D/A conversion, serial communications, bus interfacing, interrupt processing, power regulations, timers, pulse width modulation, programmable I/O ports, and error control coding. 3 hours lecture, 3 hours laboratory. (002102)
    Prerequisites: EECE 211, EECE 211L; either CSCI 111 or MECH 208. Recommended: CIVL 302.
    Measurement of steady-state and dynamic phenomena using common laboratory instruments. Calibration of instruments, dynamic response of instruments, and statistical treatment of data. 2 hours discussion, 3 hours laboratory. (005420)
    Prerequisites: EECE 211, MATH 260. Recommended: MECA 380, MECH 320; either CSCI 111 or MECH 208.
    Modeling and simulation of dynamic system performance. Control system design for continuous systems using both analog and digital control techniques. 3 hours lecture. (005407)
    Prerequisites: EECE 211L, MECH 340; EECE 482 or MECA 482 (may be taken concurrently).
    Machine automation concepts in electrical circuits, precision mechanics, control systems, and programming. Motor sizing, gearing, couplings, ground loops, effective use of step motors, servo control loops, regeneration, networking, I/O, power supplies, vibration and resonance, mechanical tolerancing, linear bearings and drive mechanisms, and troubleshooting. Labs simulate application concepts such as point-to-point coordinated moves, registration, following, camming, and CAD-to-Motion by combining various motor technologies with various mechanical drive types. 2 hours lecture, 4 hours activity. (005655)
    Prerequisites: Completion of GE Written Communication (A2) requirement, EECE 237, MECH 200, MECH 340. Recommended: CIVL 302, MECA 380.
    System design methods applied to mechatronic systems. Group design projects. Consideration of the manufacturing cost, and environmental and social impact. Oral and written presentation of results. Initial design of the capstone design project to be continued in MECA 440B. 2 hours lecture, 3 hours supervision. This is an approved Graduation Writing Assessment Requirement course; a grade of C- or higher certifies writing proficiency for majors. (005656)
    Prerequisites: MECA 440A. Recommended: CIVL 302, MECA 380.
    Continuation of the capstone design project from MECA 440A. Implementation of the capstone design project, including fabrication, testing, and evaluation of a working prototype. Information literacy, technology, and resources for lifelong learning and professional career. Must be taken the semester immediately following MECA 440A. 2 hours lecture, 3 hours supervision. (005657)
    Prerequisites: CIVL 211 with a grade of C- or higher, MATH 260.
    Kinematics and dynamics of mechanical systems composed of rigid bodies. Moments and products of inertia, forces of interaction, inertia forces and torques. Equations of motion of non-planar systems. 3 hours discussion. (005409)
    Prerequisites: CIVL 311 with a grade of C- or higher, MECH 100, MECH 100L, MECH 140, MECH 210, SMFG 160. Recommended: MECH 320.
    Design and performance of machine components and systems subjected to both steady and variable loading conditions. Failure theories, reliability, use of codes and standards, and standard design practices are introduced. Also discussed are realistic constraints for design in economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability context. 3 hours lecture, 2 hours activity. (005411)

    3 units selected from:

    SUBJ NUM Title Sustainable Units Semester Offered Course Flags
    Prerequisites: CIVL 205 (may be taken concurrently); CIVL 311 with a grade of C- or higher.
    Fundamentals of structural analysis for beams, trusses, and frames. Topics include loading (including seismic), influence lines, approximate analysis methods, deflection analysis, and statically indeterminate structures. Methods applicable to computer analysis are introduced. 4 hours discussion. (001499)
    Prerequisites: CIVL 321 (may be taken concurrently); ENGL 130 or equivalent.
    Soil properties, tests, and classification. Analysis of soil stresses, consolidation, shear strength, lateral pressures, and ground water movement. Related design consideration involving spread footings, piles, retaining walls, and slopes. Use of programmable scientific calculator required. 3 hours discussion, 3 hours laboratory. (001511)
    Prerequisites: CIVL 175 (or equivalent), junior standing.
    Introduction to water quality, water supply, distribution, and drinking water treatment; wastewater collection, treatment, and disposal. Disease transmission; water quality parameters; physical, chemical, and biological processes in the treatment of water, wastewater, and biosolids. 3 hours discussion, 3 hours laboratory. (001529)
    Prerequisites: CIVL 205; CIVL 321 with a grade of C- or higher.
    Water resources engineering covers principles of hydraulics and hydrology relevant to civil engineering applications. Topics include open channel hydraulics, rainfall-runoff predictions, ground water hydraulics, water budget modeling, storm water routing, and urban storm water management. 2 hours discussion, 2 hours activity. This course requires the use of a laptop computer and appropriate software. (021142)
    Prerequisites: CIVL 205; CIVL 302; CIVL 321 with a grade of C- or higher.
    Quantitative analysis of pressurized pipelines, pipe networks. The course includes analysis of transients in pipeline systems caused by valve movement, pump power failure, etc; design of transient control devices. 3 hours discussion. This course requires the use of a laptop computer and appropriate software. (001528)
    Prerequisites: EECE 211; MATH 260 (may be taken concurrently).
    Circuit analysis techniques for networks with both independent and dependent sources. Network topology. Natural and forced responses for RLC circuits. Complex frequency, poles, and zeros. Magnetically coupled circuits and two-port networks. Introduction to linear algebra, circuit simulation using PSPICE, and mathematical analysis using MATLAB. 4 hours discussion. (002527)
    Prerequisites: EECE 211, EECE 211L, MATH 260.
    Transmission lines. Frequency-domain techniques. Fields and field operators. Electrostatic fields and capacitance. Magneto-static fields and inductance. Time-varying fields and Maxwell equations. Skin effect. Plane electromagnetic waves. Reflection and refraction. Waveguides and optical fibers. Radiation and antennas. 3 hours lecture. (002529)
    Prerequisites: PHYS 204A, PHYS 204B, PHYS 204C.
    This course is also offered as PHYS 450.
    Geometrical and physical optics, interference, diffraction, reflection, dispersion, resolution, polarization, fiber optics, laser optics, and holography. 2 hours discussion, 3 hours laboratory. (002549)
    Prerequisites: PHYS 204C. Recommended: EECE 450 or PHYS 450.
    This course is also offered as PHYS 451.
    The theory and mechanism of laser action, various types of lasers and their applications and future use. Laboratory involves measurements with lasers, fiber optics, data transmission, and holography. 2 hours discussion, 3 hours laboratory. (002550)
    Prerequisites: EECE 211.
    Principles of electromechanical conversion, traditional and renewable energy sources, magnetic circuits and steady state performance of synchronous, dc and induction motors, state space models and dynamic performance of electric motors, linearized models and common control schemes for various motors. 4 hours lecture. (020256)
    Prerequisites: To be established when course is formulated.
    Special topic generally offered one time only. Different sections may have different topics. See the Class Schedule for the specific topic being offered. 3 hours lecture. (005653)
    Prerequisites: Approval of supervising faculty member.
    This course is an independent study of special problems offered for 1.0-3.0 units. See the department office for information on registering. 9 hours supervision. You may take this course more than once for a maximum of 6.0 units. Credit/no credit grading. (005654)
    Prerequisites: EECE 211L, MECH 340; EECE 482 or MECA 482 (may be taken concurrently).
    Machine automation concepts in electrical circuits, precision mechanics, control systems, and programming. Motor sizing, gearing, couplings, ground loops, effective use of step motors, servo control loops, regeneration, networking, I/O, power supplies, vibration and resonance, mechanical tolerancing, linear bearings and drive mechanisms, and troubleshooting. Labs simulate application concepts such as point-to-point coordinated moves, registration, following, camming, and CAD-to-Motion by combining various motor technologies with various mechanical drive types. 2 hours lecture, 4 hours activity. (005655)
    Prerequisites: To be established when course is formulated.
    Special topic generally offered one time only. Different sections may have different topics. See the Class Schedule for the specific topic being offered. 3 hours lecture. (005660)
    Prerequisites: Approval of supervising faculty member.
    Independent study of a special problem. See the department office for registration procedure. 9 hours supervision. You may take this course more than once for a maximum of 6.0 units. Credit/no credit grading. (015851)
    Prerequisites: Approval of faculty internship coordinator prior to off-campus assignment.
    Engineering experience in an industrial setting. Minimum duration of 400 hours of work under the direct supervision of an on-site engineering supervisor. On completion of the internship, a written report prepared under the direction of a faculty member is required. This course is an elective for the BS in Mechanical Engineering, a total of 3 units must be completed to receive elective credit. 9 hours supervision. You may take this course more than once for a maximum of 3.0 units. Credit/no credit grading. (005454)
    Prerequisites: To be established when course is formulated.
    Special topic generally offered one time only. Different sections may have different topics. See the Class Schedule for specific topic being offered. 3 hours lecture. (005424)
    Prerequisites: Approval of supervising faculty member.
    This course is an independent study of special problems offered for 1.0-3.0 units. See the department office for information on registering. 9 hours supervision. You may take this course more than once for a maximum of 6.0 units. Credit/no credit grading. (005426)
    Prerequisites: CIVL 311, CIVL 321, MECH 200.
    Corequisites: MECH 338, MECH 340.
    Computer modeling, simulation, and solution of engineering problems. Applications in mechanical, thermal, and fluid flow analysis. Emphasis on proper use of current commercial software and solution verification through traditional engineering analysis. 3 hours lecture. (021223)
    Prerequisites: MATH 260, MECH 210. Recommended: CIVL 311.
    Design, manufacture, and practical applications of advanced engineering materials. Failure analysis and prevention of material failure in mechanical design. Microfabrication of micromechanical devices. 3 hours discussion. (005428)
    Prerequisites: MECH 320.
    Free and forced vibrations of lumped parameter systems, transient vibrations, systems with several degrees-of-freedom. 3 hours discussion. (005437)
    Prerequisites: CIVL 321; EECE 211; MECH 338 (may be taken concurrently).
    This introductory course covers the design and operation of solar photovoltaic (PV) and solar thermal systems. Foundational topics include solar radiation characteristics, solar materials, and heat transfer. Solar PV systems include cell operations, I-V characteristics, module design, maximum power-point tracking, charge controllers, batteries, inverters, design of grid-tied and off-grid systems, and system performance evaluation. Solar thermal systems include flat-plate collectors, concentrating collectors, passive and active solar water heating, solar space heating and cooling, and solar thermal power systems. 2 hours lecture, 2 hours activity. (021438)
    Prerequisites: To be established when course is formulated.
    Special topic generally offered one time only. Different sections may have different topics. See the Class Schedule for the specific topic being offered. 3 hours lecture. (005456)

    Grading Requirement:

    All courses taken to fulfill major course requirements must be taken for a letter grade except those courses specified by the department as Credit/No Credit grading only.

    Advising Requirement:

    Advising is mandatory for all majors in this degree program. Consult your undergraduate advisor for specific information.

    Honors in the Major:

    Honors in the Major is a program of independent work in your major. It requires 6 units of honors course work completed over two semesters.

    The Honors in the Major program allows you to work closely with a faculty mentor in your area of interest on an original performance or research project. This year-long collaboration allows you to work in your field at a professional level and culminates in a public presentation of your work. Students sometimes take their projects beyond the University for submission in professional journals, presentation at conferences, or academic competition. Such experience is valuable for graduate school and professional life. Your honors work will be recognized at your graduation, on your permanent transcripts, and on your diploma. It is often accompanied by letters of commendation from your mentor in the department or the department chair.

    Some common features of Honors in the Major program are:

    1. You must take 6 units of Honors in the Major course work. All 6 units are honors classes (marked by a suffix of H), and at least 3 of these units are independent study (399H, 499H, 599H) as specified by your department. You must complete each class with a minimum grade of B.
    2. You must have completed 9 units of upper-division course work or 21 overall units in your major before you can be admitted to Honors in the Major. Check the requirements for your major carefully, as there may be specific courses that must be included in these units.
    3. Your cumulative GPA should be at least 3.5 or within the top 5% of majors in your department.
    4. Your GPA in your major should be at least 3.5 or within the top 5% of majors in your department.
    5. Most students apply for or are invited to participate in Honors in the Major during the second semester of their junior year. Then they complete the 6 units of course work over the two semesters of their senior year.
    6. Your honors work culminates with a public presentation of your honors project.

    While Honors in the Major is part of the Honors Program, each department administers its own program. Please contact your major department or major advisor to apply.

  • Catalog Cycle:17